Here it is, the world’s most advanced micro jet. about 4.5″ diameter and puts out roughly 100 lbs of static thrust. This is the 5 stage Bladon turbine. Can it fit in an rc jet? You bet it can. With twice the thrust. Can people afford it, well, pretty sure some can, but not many. All in all, this is an engineering marvel. The Bladon brothers took an axial-flow turbine and scale it down to rc jet standards. Simply Marvelous. Currently, the turbine is only used by Jaguar automotive. thanks for watch and please subscribe www.cozmiktoys.com
World’s Best FPV Easystar Video! Live video feed, video from onboard camera gets transmitted in real time to the video goggles. FPV= abbreviation for “First Person View” For insane “Flying Wing” videos go to “Nastycop420″ and “Gabriel2584″. If there is a better Multiplex Easystar FPV vid I will change the title immediately! Compilation of my first 8 flights or approx. 1,3 flight hours. I did not build in the current sensor. Running the FPV gear with the flight battery. Recording with EasyCap USB adapter and Notebook, compressing with Xvid. Setup: Modified Multiplex Easystar: Ailerons, Brushless motor Turnigy C2409- 1600 KV ESC NoName or Turnigy, 30A Prop 7×6 2x Multiplex Tiny S 2x GWS Mini Kokam 2100 H5 30C 11,1V 3s Thunder Tiger ACE TG6000 Gyro on elevator Graupner/JR MX-16s 40 Mhz Graupner/JR SMC-16 Scan PCM receiver: 3685m antenna Detrum 9g Pan servo FPV setup: Fat Shark RCV922 Aviator Edition with strong TX Black Stork OSD AUW: approx. 915 g Weight FPV gear: approx.115 g Thrust: approx. 700 g Flight time: 15- 20 min. Stall speed: 20-25 km/h Top speed: 90 km/h
This video shows the original world’s first landing of an R/C helicopter on the ceiling. It was performed in late 2002 by Tobias “2f2f” Wagner. More such stunts can be found on www.heligraphix.com
Shawn Palmer @ Schumacher —– Supported me from he beginning! Nick Maslowski for loaning me key equipment Steve Rodgers @ Flight Power for great batteries & the help in he pits & retrieving the car The People at Castle —— great electronic equipment Josh Tyler & Lou —– for all the help during testing ! Steve Neu —— building a great motor All the people at RC4WD —– for machining some great wheels ! Greg H & Freeman T — for the support Rob Donelson — Brainstormer Matt …
